Academic help online

Link AC is made of a steel with a 65-ksi ultimate normal stress and has a 1/4 X 1/2-in. uniform rectangular cross section. It is connected to a support at A and to
member BCD at C by 3/4-in.-diameter pins, while member BCD is connected to its support at B by a 5/16-in.-diameter pin. All of the pins are made of a steel with a 25-
ksi ultimate shearing stress and are in single shear. Knowing that a factor of safety of 3.25 is desired, determine the largest load P that can be applied at D. Note
that link AC is not reinforced around the pin holes.

All Rights Reserved,
Disclaimer: You will use the product (paper) for legal purposes only and you are not authorized to plagiarize. In addition, neither our website nor any of its affiliates and/or partners shall be liable for any unethical, inappropriate, illegal, or otherwise wrongful use of the Products and/or other written material received from the Website. This includes plagiarism, lawsuits, poor grading, expulsion, academic probation, loss of scholarships / awards / grants/ prizes / titles / positions, failure, suspension, or any other disciplinary or legal actions. Purchasers of Products from the Website are solely responsible for any and all disciplinary actions arising from the improper, unethical, and/or illegal use of such Products.